Altamonte Springs · Seminole County, Florida · General handyman services -- no electrical, plumbing, HVAC or roofing work
Handyman services · 32701[NEED: phone number]

HomeDrywall repair cost

Cost guide

Drywall repair cost in Altamonte Springs, Florida

Most drywall repair jobs run $150–$925 nationally depending on damage size and type, with small holes at the low end and water-damage repairs running well past $1,000. Altamonte Springs’s housing mostly dates from a single 1970s–80s building boom, and its housing mix is more condo and townhome than standalone house -- both push toward more, smaller drywall jobs rather than large ones. These are researched third-party market ranges, not a quote.

Why drywall is the highest-volume job here

Old trim, small units, humid climate

72.4% of Altamonte Springs’s 13,253 residential parcels were built 1970–1989, and the city’s condo and townhome stock (roughly 62% of all units) tends toward smaller rooms with more corners and door-opening drywall per square foot of living space than a larger detached house. Central Florida’s humidity also means a slow, unnoticed leak -- a condensate line, a roof flashing failure, a window seal -- can damage drywall well before it produces a visible puddle, so a water stain or soft spot gets checked for an active moisture source before it gets patched.

Researched market ranges

What drywall repair typically costs

National and Florida-market drywall repair pricing, September 2026
Job typeTypical range
Small hole (under 10 sq ft)$50 – $150
Medium hole (10–25 sq ft)$150 – $400
Ceiling repair$250 – $1,400
Water-damage repair$500 – $2,500+
Typical overall job (national average ~$612)$295 – $925
Textured-finish matching (per sq ft)$70 – $95

Sources: Angi, drywall repair cost; Homewyse, cost to repair drywall. Compiled September 2026; not this business’s pricing.

Before you patch

Find the water source first

A discolored, soft or bulging patch of drywall is usually a symptom, not the problem. In this climate the most common causes are a clogged AC condensate line, a slow plumbing leak inside a wall, a failed window or door seal letting humidity in, or roof/flashing intrusion above. Patching over an active leak looks fine for a few weeks and then fails again in the same spot -- and if the source turns out to be plumbing, HVAC or roofing, that part of the fix needs its own licensed trade, which we’ll tell you before we patch anything.